viper 5091 lc3 on 2002 civic coupe ex
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=127011
Printed Date: July 06, 2025 at 8:19 AM
Topic: viper 5091 lc3 on 2002 civic coupe ex
Posted By: irich25
Subject: viper 5091 lc3 on 2002 civic coupe ex
Date Posted: April 19, 2011 at 4:36 AM
So far i got most of the alarm part done, but kind of lost on the remote start part.
H1/1 RED / WHITE AUX/TRUNK OUTPUT @@ n/a
H1/2 RED 12VDC CONSTANT INPUT @@ gray backup battery
H1/3 BROWN SIREN OUTPUT @@ red siren
H1/4 WHITE/ BROWN PARKING LIGHT ISOLATION WIRE @@ ??
H1/5 BLACK GROUND @@ ground
H1/6 VIOLET + DOOR TRIGGER @@ notused
H1/7 BLUE TRUNK PIN/INSTANT TRIGGER INPUT @@ red(alarm)
H1/8 GREEN - DOOR TRIGGER @@ GREEN/ red(alarm)
H1/9 BLACK/ WHITE DOME LIGHT SUPERVISION OUTPUT @@ ??
H1/10 WHITE/ BLUE REMOTE START/ TURBO TIMER ACTIVATION INPUT @@ not used
H1/11 WHITE PARKING LIGHT OUTPUT @@ blue(alarm)
H1/12 ORANGE GROUND WHEN ARMED OUTPUT @@ n/a
H2/1 LIGHT GREEN/ BLACK OEM ALARM DISARM OUTPUT @@ ??
H2/2 ORANGE / BLACK AUX 4 OUTPUT @@ notused
H2/3 GREEN / WHITE OEM ALARM ARM OUTPUT @@ ??
H2/4 VIOLET/BLACK AUX 2 OUTPUT @@ notused
H2/5 WHITE/ BLACK AUX 3 OUTPUT @@ notused
H2/6 WHITE/ VIOLET AUX 1 OUTPUT @@ notused
H2/7 GREY/BLACK DISEL WAIT TO STAT INPUT @@ notused
H2/8 BROWN / BLACK HORN HONK OUTPUT @@ ??
H2/9 VIOLET/WHITE TACHOMETER INPUT @@ blue(by battery)
H2/10 DARK BLUE STATUS OUTPUT @@ bypass module
H2/11 PINK/WHITE FLEX RELAY CONTROL OUTPUT @@ ??
H2/12 ORANGE ACCESSORY OUTPUT @@ notused
H2/13 PURPLE STARTER OUTPUT @@ notused
H2/14 PINK IGNITION 1 OUTPUT @@ notused
H2/15 GREY HOOD PIN INPUT @@ hoodpin
H2/16 BLUE/WHITE 2ND STATUS/REAR DEFOGGER OUTPUT @@ ??
H2/17 BROWN BRAKE SHUTDOWN INPUT @@ ??
H2/18 BLACK/ WHITE NEUTRAL SAFTEY INPUT @@ ??
H3/1 PINK IGNITION 1 @@ BLACK / YELLOW(ignition)
H3/2 RED / WHITE FLEX RELAY INPUT 87 @@ ??
H3/3 ORANGE ACCESSORY OUTPUT @@ BLACK/ red(ignition)
H3/4 VIOLET STARTER OUTPUT @@ BLACK/ white(ignition)
H3/5 GREEN STARTER INPUT @@ BLACK/ white (keyside)
H3/6 RED INGIITON 1 INPUT @@ white
H3/7 PINK/WHITE FLEX RELAY OUTPUT 30 @@ ??
H3/8 PINK/BLACK FLEX RELAY INPUT 87A @@ ??
H3/9 RED / BLACK ACCESSORY/STARTER RELAY INPUT @@ white(igniton)
Door Lock
1 BLUE UNLOCK OUTPUT @@ WHITE/ green(driver kick)
3 GREEN LOCK OUTPUT @@ WHITE/ blue(driver kick)
Replies:
Posted By: smokeman1
Date Posted: April 19, 2011 at 12:35 PM
H3/2, H3/6, H3/9 to White (+) 12 Volts Constant....H3/7 to WHITE/ Red as Accessory 2, This comes defaulted as Ignition 2 and needs to be changed to Accessory, Menu 3, Item 8, Option 2. All your other H3 wires look OK.
H2/17 to WHITE/ Black (+) above at switch above barke pedal.
https://www.bulldogsecurity.com/bdnew/vehiclewiringdiagrams.asp
As always, check and verify all wires with a DMM
------------- When all else fails, Read the Instructions
Support the12volt.com Make a Donation
Posted By: irich25
Date Posted: April 19, 2011 at 4:18 PM
What about H3/8?
Posted By: smokeman1
Date Posted: April 19, 2011 at 7:57 PM
H3/8 should not be needed on your car.
-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation
Posted By: irich25
Date Posted: April 19, 2011 at 8:17 PM
alright thanks, so far so good, got remote start to work with key in off position.
How do i do tach learning or do i not need to do it?
Posted By: smokeman1
Date Posted: April 19, 2011 at 9:41 PM
You can download the install manual for the 5901 on this site from the downloads section. On page 30 explains the tach learning procedure.
-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation
Posted By: irich25
Date Posted: April 20, 2011 at 2:05 AM
okay got that got the 555i installed, but for some reason its not starting and none of my keys are turning on the car anymore..
Posted By: irich25
Date Posted: April 20, 2011 at 2:25 AM
nvm the key works now but still wouldn't remote start. The remote start worked when before installing the bypass module tho
Posted By: smokeman1
Date Posted: April 20, 2011 at 8:06 PM
Do you get any parking light flashes when tring to remote start?
-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation
Posted By: irich25
Date Posted: April 21, 2011 at 3:28 AM
No there was no parking light flashes, just gives me an error on my remote
Posted By: irich25
Date Posted: April 21, 2011 at 3:40 AM
Remote start still wouldn't work with 555i removed
But removing the 555i solved my key problem
Do you think i have a defective 555i, because sometimes the car would not recognize my key.
Posted By: irich25
Date Posted: April 22, 2011 at 2:06 AM
i also double check that it was set to accessory 2 but still gives me an error with no flashes...
Posted By: irich25
Date Posted: April 22, 2011 at 6:58 PM
any suggestions?
Posted By: irich25
Date Posted: April 27, 2011 at 2:41 AM
I have everything working except the parking flashes stop working all of a sudden. I have the light flash polarity on negative, and the white h1/11 hooked up to the parking lights. Do I need a relay or something?
Posted By: paradox_108
Date Posted: April 27, 2011 at 4:52 AM
check your fuses if everything was working
Posted By: t&t tech
Date Posted: April 27, 2011 at 5:30 AM
Did they work before? ------------- COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF.
PSALMS 37:5
Posted By: irich25
Date Posted: April 27, 2011 at 4:15 PM
all the fuses on the alarm are okay
yea they did work before
when i use my old remote the flashes work perfectly
Posted By: t&t tech
Date Posted: April 27, 2011 at 6:29 PM
When you say use your old remote, do you mean the old system that was in the car, if so, have you inserted the fuse in the correct polarity jumper at the top of the control module?
-------------
COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF.
PSALMS 37:5
Posted By: irich25
Date Posted: April 27, 2011 at 7:29 PM
yea, the polarity is currently on negative jumper
Posted By: irich25
Date Posted: April 30, 2011 at 2:29 AM
is H1/11 WHITE, the main wire that controls the parking flashes?
|