Print Page | Close Window

2007 chrysler town and country wiring

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=127192
Printed Date: May 17, 2025 at 1:54 AM


Topic: 2007 chrysler town and country wiring

Posted By: rickbaker69
Subject: 2007 chrysler town and country wiring
Date Posted: May 02, 2011 at 9:11 AM

I have a 2007 Chrysler Town and Country Touring with powered doors and rear hatch.

I am looking for wire colors for ignition and door panel to install a remote start. Don't necessarily need the door information, mine are working fine. (now that I said that, watch and I'll be back in a week asking for that info)




Replies:

Posted By: kreg357
Date Posted: May 02, 2011 at 12:40 PM

The easy way to do this vehicle is with an iDatalink ADS-ALSL-CH bypass module.  It will handle the ignition transponder immobilizer, door locks, alarm, sliding doors and provide a nice Tach and brake signal.  You will still need to make a hard wired connection for the power liftgate.  Here is a link to the iDatalink WEB site for more info :  https://www.idatalink.com/helpdesk/  Download the install guide for wiring details.

Here is a link to Bulldog Security for more wiring info : https://www.bulldogsecurity.com/bdnew/vehiclewiringdiagrams.asp  Plenty of pictures, too.



-------------
Soldering is fun!


Print Page | Close Window