place to buy parts for dei alarms?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=127229
Printed Date: May 19, 2025 at 1:32 PM
Topic: place to buy parts for dei alarms?
Posted By: raab3485
Subject: place to buy parts for dei alarms?
Date Posted: May 04, 2011 at 9:48 PM
I bought a Clifford 50.7x alarm/remote start at my previous employer. Unfortunately, I bought this alarm (at a significant discount), during our liquidation, as the company went out of business (Ultimate Electronics). Upon trying to install the alarm, long after our stores all closed, I discovered that someone had opened it, and taken 2 key harnesses out of the box. I'm missing the cord that goes between the brain and the antenna (it has one in the box, but it's the wrong one, it's the one with 3 plugs on one end, antenna, valet switch and led, I need the one where this is all on one 6 pin plug), and it's missing the H2 18-pin harness.
Does anybody know of a place where I could find just these parts? I checked in our spare parts at work, and we don't have anything, and I looked on ebay to no avail, and unless you are a dealer, Directed has made it nearly impossible to actually contact them for any type of support.
Or, is there any shot that anybody on the forums has these parts lying around that I could buy from you, hopefully on the cheap??
Thanks
Replies:
Posted By: howie ll
Date Posted: May 05, 2011 at 9:47 AM
An authorised dealer should be able to supply the parts. With the H2 harness you won't need all of them, why not just solder directly the ones you need.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|