Print Page | Close Window

2011 jeep compass

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=127230
Printed Date: May 19, 2025 at 7:34 PM


Topic: 2011 jeep compass

Posted By: russbm
Subject: 2011 jeep compass
Date Posted: May 04, 2011 at 10:02 PM

Hello

    I am installing a Seat heater on both front seat of a 2011 Jeep Compass, was going to connect the 12v hot wire to the ign 12v power outlet but i notice it is a small wire and not a thick one, even the ign 12v at the ign switch is small wire. What is the proper way for a relay diagram for this.

Thanks.

Russell




Replies:

Posted By: blanx218
Date Posted: May 04, 2011 at 11:48 PM

Pin 87 to +12V battery power.

Pin 85 to the ignition wire

Pin 86 to ground

Pin 30 to the power wire of the seat heaters


Print Page | Close Window