474v remote
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=127343
Printed Date: April 26, 2024 at 5:02 AM
Topic: 474v remote
Posted By: lucasoil4u
Subject: 474v remote
Date Posted: May 15, 2011 at 1:30 PM
Im looking for a 474V viper Remote. New or used dont matter. The cheaper the better. Please let me know what you have.
Thank
Ryan
Replies:
Posted By: smokeman1
Date Posted: May 15, 2011 at 4:41 PM
What model remote start is this for?
-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation
Posted By: Mike M2
Date Posted: May 15, 2011 at 6:16 PM
You can buy them on Ebay for 20 bucks shipped....
-------------
Mike M2
Tech Manager
CS Dealer Services
Posted By: lucasoil4u
Date Posted: May 19, 2011 at 6:01 PM
Viper 560xv
Thanks
Posted By: lucasoil4u
Date Posted: May 20, 2011 at 5:52 PM
i got a remote now. how do i program it to my unit. it was programed to a different car. will i be able to program it to my alarm?
thanks
ryan
Posted By: t&t tech
Date Posted: May 20, 2011 at 6:51 PM
Yup, once it is functional it will program, turn on ignition with a door open, press the valet switch eight times and hold on the eigth press, when you hear seven chirps, then you press the lock button, you should then hear a long chirp which indicates success.
-------------
COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF.
PSALMS 37:5
Posted By: lucasoil4u
Date Posted: May 21, 2011 at 4:24 PM
Tried that and it wont program! will a 474v program to a 560xv? My lcd remote will program for about 15 minutes and then it losses program! It will also kill a AAA battery in 8 hours or so. So Im sure the remote is bad! Why wont the 474v remote program? I can keep programing the bad remote by hitting valet button once and holding lock but it only holds program for 15 minutes or so. Please help.
Ryan
Posted By: smokeman1
Date Posted: May 21, 2011 at 6:24 PM
What are the steps you are doing to program the remote? Is it possible that the unit is locked via a BitWriter?
-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation
Posted By: lucasoil4u
Date Posted: May 21, 2011 at 9:08 PM
open door turn on ignition press valet button and hold and press lock on remote. the lcd remote will program this way! the other four button remote will not program that way . and why would one program and the other one not. that doesnt seem like it would be locked with bitwriter.
Posted By: smokeman1
Date Posted: May 22, 2011 at 7:52 AM
According to the manual, you should press the valet button once and release, and then press and hold, you should get one horn honk /LED flash to confirm the channel selected. Channel 1. I believe you should press the LOCK Button for AUTO LEARN. You chould get a confirmation chip. If not the Lock Button try the * Button. It's been a while since I have done one on these so I'm not sure on what button is AUTO Learn.
Check your FCC ID # on this cross reference page: https://www.drdetailshop.com/transcross.htm
You could also try to delete all remotes and then program the 474 to the Viper. ------------- When all else fails, Read the Instructions
Support the12volt.com Make a Donation
Posted By: t&t tech
Date Posted: May 22, 2011 at 12:49 PM
Auto learn is the lock button, also it forgot it was the remote start config you had to use, so yes hold on the second press, if it's taking the programming and then losing it then the brain isn't locked. ------------- COMMIT YOUR WAY TO JEHOVAH AND HE WILL ACT IN YOUR BEHALF.
PSALMS 37:5
Posted By: lucasoil4u
Date Posted: May 22, 2011 at 2:55 PM
i cant get the 474v to program i can only get the lcd to program.i will try again
Posted By: lucasoil4u
Date Posted: May 26, 2011 at 7:52 PM
Wont program. Gonna try deleting all remotes amd see if thst helps. Amy other tips
|