1997 accord 530t wiring

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=127364
Printed Date: April 29, 2024 at 1:28 PM

Topic: 1997 accord 530t wiring

Posted By: shadow818
Subject: 1997 accord 530t wiring
Date Posted: May 17, 2011 at 10:59 AM

I have a 1997 accord se im wiring the 530t but im having issues with the master driver window not working. The switch has a factory auto down. So how would i wire it and to what wires for the 530t to work with my alarm.?

Replies:

Posted By: shadow818
Date Posted: May 19, 2011 at 11:56 AM

anyone?

Posted By: zerovandez
Date Posted: May 26, 2011 at 8:58 AM

Hey take a look at the link. I found it under the vehicle wiring section on this site. I hope it helps you.

https://www.the12volt.com/installbay/alarmdetail/1037.html

Posted By: Mark Mizenko
Date Posted: May 26, 2011 at 1:04 PM

Make you connections for the drivers window... AT THE MOTOR. That will be after the switch, and not affected by the factory auto/down circuit.

Posted By: howie ll
Date Posted: May 26, 2011 at 5:06 PM

In fact to make it work as per spec, one touch up and down from ALL switches, always go to EACH pair of motor wires at the motor.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Print Page | Close Window