avantguard 5.5 , concept 650 siren tone
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=127401
Printed Date: May 19, 2024 at 2:09 PM
Topic: avantguard 5.5 , concept 650 siren tone
Posted By: is200_turbo
Subject: avantguard 5.5 , concept 650 siren tone
Date Posted: May 20, 2011 at 7:44 AM
Hi all
I now have both these alarms Installed
avantguard 5.5 in my Is200 turbo
Concept 650 in a Nissan Stagea NA
now the installer that set my Avanguard unit up changed the alarm tones via the keyfob under the installer section, now i have hunted high and low but cant work out which section he did it have spoken to previous owner and they remember him saying its not including in the UK guide and is a hidden feature.
does anyone know how this can be done via the remote
the reason for this is i want to do the same tone outlet on my new alarm so both match as it will then stand out should either alarm go off, where ever i am...
Replies:
Posted By: howie ll
Date Posted: May 20, 2011 at 11:36 AM
PM me with your email address I'll send you the install sheet for the US AG 5.1 which shows you how. It's the same processor as 650 ll and 5.5
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|