remote not communicating?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=127428
Printed Date: May 03, 2024 at 6:12 AM

Topic: remote not communicating?

Posted By: ekjrsx
Subject: remote not communicating?
Date Posted: May 22, 2011 at 9:53 PM

I have a viper 5900 in a 94 Toyota pickup. I had the battery unhooked for a couple days.Now the remote will not communicate. It just gives 3 beeps coming from the remote after you press a button . I tried to reprogram the remote via the manuals instructions but no luck. If anyone can help I would be very grateful!

Replies:

Posted By: blanx218
Date Posted: May 22, 2011 at 10:47 PM

disconnect the 2 harnesses that have +12V constant from the brain and plug them back in. That should solve your issue. If not check your fuses.

Posted By: ekjrsx
Date Posted: May 22, 2011 at 10:50 PM

Okay I will try that. I'm pretty sure the fuses are good because the door locks still work when I turn the key off and on?

Posted By: Mark Mizenko
Date Posted: May 26, 2011 at 1:11 PM

Try unplugging the antenna, and plugging it back in. I have that happen to a few customers and it fixed the problem. I doubt it's a transmitter problem if it worked fine until that.

BE CAREFUL unplugging the antenna, the connector can be pretty tight, and you can pull one of the wires out if you;re not careful.

Posted By: ekjrsx
Date Posted: May 26, 2011 at 2:32 PM

I will try this over the weekend and let you know what happens. Thanks!

Print Page | Close Window