Ignition wires 1&2?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=12743
Printed Date: June 15, 2024 at 8:19 PM

Topic: Ignition wires 1&2?

Posted By: v8pwr
Subject: Ignition wires 1&2?
Date Posted: April 25, 2003 at 3:52 PM

When installing the starter kill, and if there are more than one ignition wires at the harness (according to the wiring diagram), do I have to connect ignition input from alarm to both of these wires? or do I just connect to either one?

Thanks for your help!

Replies:

Posted By: draasch
Date Posted: April 25, 2003 at 9:31 PM

if you have more then one and you are going to use a relay to disable the starter, treat the wires as one.

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Print Page | Close Window