Print Page | Close Window

clifford matrix 1.2

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=127437
Printed Date: May 13, 2025 at 1:40 PM


Topic: clifford matrix 1.2

Posted By: tony_g
Subject: clifford matrix 1.2
Date Posted: May 23, 2011 at 11:20 PM

hey everybody,

im looking for install instructions for a clifford matrix 1.2 remote start (p/n 4102x).

my dad just bought a new truck and the previous owner had installed the r/s but there are some issues that i need to fix as they were not done correctly and i will also need the programming options listed in the install manual

thank,

tony




Replies:

Posted By: howie ll
Date Posted: May 24, 2011 at 4:33 AM
Now in downloads, the alarm section.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.




Posted By: tony_g
Date Posted: May 24, 2011 at 1:40 PM
thanks howie, as usual you are a star. big two thumbs up




Posted By: jin01
Date Posted: April 04, 2012 at 10:16 AM
i buy this same system, but i saw it says smart start which should be with a cell phone. how do i activate that option?/




Posted By: howie ll
Date Posted: April 04, 2012 at 10:20 AM
You need to buy the Smart Start unit, also here we can buy it with UK GSM, what does the US version use and what cellular system do they use in Jamaica? US or UK?

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.




Posted By: jin01
Date Posted: April 04, 2012 at 10:31 AM
ill say they use same as usa.




Posted By: howie ll
Date Posted: April 04, 2012 at 11:36 AM
You will have to find a dealer in Jamaica/or wherever you got your current unit.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.




Posted By: jin01
Date Posted: August 06, 2012 at 8:55 PM
well after so many months as past, with the system in doing some reading etc is there any way to get this thing to alarm when arm? if not since it does not seem to even been an alarm any way to tie it in with a cheap one?




Posted By: tony_g
Date Posted: August 06, 2012 at 11:55 PM
matrix 1.2 is just a remote starter,smart start will work with alarms but you have to buy an alarm/starter combo for the security features which will work with smartstart, when you say alarm when arm do you mean confirmation honk when locking/unlocking via remote or smartstart app? if so then you just need to tie in the horn honk output from matrix to vehicle horn wire with or without relay depends on the vehicle.

-------------
i have way too much time on my hands.....




Posted By: jin01
Date Posted: August 07, 2012 at 6:32 AM
well full alarm like if i kick the car it goes off, i was thinking if i add like a shock sensor or a DEI 508D Dual Zone Motion i might get something out of it. is it possible?




Posted By: jin01
Date Posted: August 07, 2012 at 6:59 AM
as you know its just a remote start/keyless entry only if i add like the DEI 508D to it will it trigger alarm if someone goes close?




Posted By: tony_g
Date Posted: August 07, 2012 at 1:04 PM
adding sensors wont do anything because it is not programmed to behave like an alarm and it has no sensor inputs for warn away or alarm

-------------
i have way too much time on my hands.....




Posted By: jin01
Date Posted: August 07, 2012 at 2:07 PM
yea i come to that conclusion. i have an option to just tru it out an get a IntelliGuard IG 770 system, or change the brain to a 3.3x matrix.





Print Page | Close Window