Troble programing alarm system

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=12745
Printed Date: May 21, 2024 at 2:05 PM

Topic: Troble programing alarm system

Posted By: CHASER
Subject: Troble programing alarm system
Date Posted: April 25, 2003 at 4:19 PM

I have a Vadar alarm system made by autosecure. I begun installing it and I want to test the system as I make each connection. If anyone knows this system to program it I cant get the system to recognize my remote/ pager, it will not program it. There is a chart that shows where to go program it but i was not successful. Maybe I need to tie in all the wires first. I still need to tie in the door pins, trunk/hood , parking lights, and dome light.

Thanks for your help in advance.

Replies:

Posted By: draasch
Date Posted: April 25, 2003 at 9:33 PM

that is possible. finish your hook ups and then try it.

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Posted By: JWorm
Date Posted: April 25, 2003 at 10:14 PM

Some alarms need to see a door open before it will go into programming. Test all the wires you are connecting to and then test it when you are done.

Posted By: CHASER
Date Posted: April 27, 2003 at 12:43 PM

I have finished hooking up all the wires and I cant get it to accept the remote/pager. Has anyone worked with the Autosecure Vadar system. Apparently its so great, I saw articles in MM&FF and in a couple of other automotive magazines thats why i bought it . I cant even find a phone number for them.

Posted By: draasch
Date Posted: April 27, 2003 at 9:47 PM

try sending Velocity Motors an e-mail. he is up by you and he might have heard of that brand.....

-------------
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt

Print Page | Close Window