what wires to remote start 07 corolla?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=127654
Printed Date: May 21, 2024 at 5:56 PM

Topic: what wires to remote start 07 corolla?

Posted By: sleepydragon636
Subject: what wires to remote start 07 corolla?
Date Posted: June 17, 2011 at 1:35 AM

im trying to install a viper 5701 to a 2007 corolla. everything is good except for remote start. i got the xk05 transponder interface. I need two wires, the rx output and the tx output. The guide i have says the wires are located on T9 black connector located at the ignition switch.. i looked at the car and cant find this connector. Some help would be greatly appreciated.

Replies:

Posted By: kreg357
Date Posted: June 17, 2011 at 4:04 AM

This info for the 2007 Corolla from iDatalink :
RX Pin Color TX Pin Color Keysense
Corolla 05-08 4 Blue 5 Green Blue/Black @ Ignition Switch

The RX / TX connector should be a 7 Pin connector and Pin 3 is empty. Keysense is found on a separate connector,
usually a 2 Pin connector.

Here is a link to a Fortin install guide : https://ifar.ca/en/download/3380/preview.html There is a good illustration
of the ignition switch and connectors for your Corolla on Page 6 - Connection 1.

Also verify that the XK05 has the 5.PKTI firmware loaded for this type of install. If the XK05 has the PKT2 firmware
the bypass connections go to the IMO / IMI wires at the ECM behind the glove box.

-------------
Soldering is fun!

Posted By: Mike M2
Date Posted: June 17, 2011 at 6:25 AM

The plug is connected to the black plastic ring around the key cylinder. Look at the cylinder, look at the plastic piece around it, it will pop off if you pull on it, plug is attached...

-------------
Mike M2
Tech Manager
CS Dealer Services

Posted By: sleepydragon636
Date Posted: June 17, 2011 at 7:08 AM

thats all the info i needed. thanks for the help.

Posted By: sleepydragon636
Date Posted: June 17, 2011 at 7:15 AM

How do i figure out what firmware on the xk05?