missing instructions for aga1201
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=127681
Printed Date: May 10, 2025 at 10:46 AM
Topic: missing instructions for aga1201
Posted By: alysher
Subject: missing instructions for aga1201
Date Posted: June 19, 2011 at 6:43 PM
my girlfriend purchased an Aftermarket Generation model AGA1201. unfortuanatly the box was missing the instructions. now there is a plenty of information online about installing alarms and remote start systems, but since i have never actually installed a keyless entry/alarm system, i need some help. now i have figured out how to hook up the remote start system and the starter killer(luckly the main module has a small diagram on the backside and the info for the starter killer was easy enough to find) unfortuantly the 10 pin and 6 pin information is kind of hard to figure out. i know where only one pin of the 6p connector goes(to the starter killer)and 4 of the 10p connector hooks to the battery, ground, parking lights and siren, but the rest are eluding me. would any one happen to have any help/possibley even a copy of the manual in pdf form that i could get.
and just so every one is on the same page...the manufacturer of the system has been very silent.....
Replies:
Posted By: alysher
Date Posted: June 19, 2011 at 6:51 PM
quick update. also realized i need info for the 8p connector and where exactly the comuincation unit needs to be placed in the vehicle. please any one with ANY info please help!
|