viper 5901 on a 2009 escalade

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=127705
Printed Date: May 03, 2025 at 12:31 AM

Topic: viper 5901 on a 2009 escalade

Posted By: jgos929
Subject: viper 5901 on a 2009 escalade
Date Posted: June 22, 2011 at 5:51 PM

I have a few questions. I have a 2009 Escalade with the Viper 5901 alarm and remote start. For some reason when I disarm it sometimes it sets off the stock alarm and the horn will start honking. I was told the module just had to be reflashed or something but now after that it is doing it again. And 2nd on my escalade before the alarm

Anybody got any ideas???

Replies:

Posted By: Mark Mizenko
Date Posted: June 23, 2011 at 2:14 PM

What interface module.

Maybe domelight conveinence will turn your puddle lights on.

The Viper wont turn your headlights on. (it's arms are too short)

I would return to the dealer and insist they remedy the problems, if they "The Authority", and you paid for them to do it.

Posted By: thecoolmankyle7
Date Posted: June 26, 2011 at 5:12 PM

I would absolutly take it back to the installer and let them trouble shoot it. The horn honking sounds almost like the factory alarm not disarming when you unlock it... It will probably never function like the factory remote start did with the climate because there is no way for them to "talk" if you will, like the factory does with the data bus. You should be able to just set your climate to full auto and let it do the work when you remote start it. If you set a temp and put it on auto even with the ac on and then remote start it, it will do heat or ac, what ever is needed.