viper 5301 draining battery

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=127736
Printed Date: May 15, 2024 at 7:25 AM

Topic: viper 5301 draining battery

Posted By: jsnone1
Subject: viper 5301 draining battery
Date Posted: June 25, 2011 at 1:26 AM

I have installed 5 or 6 of these, but this is the first time I integrated the power locks. It's on a 2001 Grand Am. I used the module that bypasses the passlock and integrates the door locks all in one.

For some reason when I lock the doors using the remote start remote it drains the battery. I also notice a "hum" or static coming from the rear speakers. If I lock the doors with the factory remote everything is fine

Any help is GREATLY appreciated!!!

Replies:

Posted By: kreg357
Date Posted: June 25, 2011 at 6:55 AM

Which Brand / Model bypass did you use?

-------------
Soldering is fun!

Posted By: Mark Mizenko
Date Posted: June 25, 2011 at 10:02 AM

Does it have some kinda chime retention interface for an aftermarket radio?

Posted By: jsnone1
Date Posted: June 25, 2011 at 10:53 AM

Xpresskit GMDLBP

The chime still works

Posted By: Mark Mizenko
Date Posted: June 25, 2011 at 1:13 PM

Good for the chime.

Posted By: jsnone1
Date Posted: June 30, 2011 at 9:32 PM

Mark Mizenko wrote:

Does it have some kinda chime retention interface for an aftermarket radio?

Print Page | Close Window