viper 350 plus chevy trailblazer

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=127747
Printed Date: May 09, 2025 at 11:52 PM

Topic: viper 350 plus chevy trailblazer

Posted By: chevy06tb
Subject: viper 350 plus chevy trailblazer
Date Posted: June 27, 2011 at 1:16 AM

Hey guys ive been surfing the net for about 3 hours researching how to install the viper 350 plus im about to buy. on a different forum i belong to ive also made a post, because i have the LS version of my car it didnt come with factory keyless entry system. I was going to use the Omega DB-GMDLBP module to get the locks to work with the car alarm system and i was wondering how you would connect the module to the viper system etc. given the wire diagram from this pic here. Since the Viper system that im purchasing does not have remote start, would i only hook up the Green and Blue wires from the harness to the viper? or would i have to make more connections?

Replies:

Posted By: chevy06tb
Date Posted: June 27, 2011 at 1:18 AM

the trailblazer i am installing this in is a 2006, sorry for not specifying in the first post

Posted By: Mark Mizenko
Date Posted: June 27, 2011 at 1:03 PM

Power, Ground and the Blue and Green Doorlock inputs, thats all you'll need on the GMDLBP (a good interface).

Oh, and the purp output to your OBD connector

Posted By: chevy06tb
Date Posted: June 27, 2011 at 3:39 PM

thanks for the reply, any idea where the OBD connecter is?

Posted By: buddholly
Date Posted: June 28, 2011 at 11:45 AM

The OBDII connector will be right below the drivers dash area. Just Google it, they all the same.

-------------