Help setting invisibeam sensor

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=12778
Printed Date: May 15, 2025 at 6:20 PM

Topic: Help setting invisibeam sensor

Posted By: magic2
Subject: Help setting invisibeam sensor
Date Posted: April 26, 2003 at 3:38 PM

I have a viper 790 installed in my truck. I had the invisibeam sensor installed and want to know how to adjust it. There are 2 adjustement screws on the sensor it self. I just don't know how to set them , or what they are for.

thanks in advance

John.

Replies:

Posted By: krazypolishboy
Date Posted: April 27, 2003 at 9:03 PM

are they side by side? if so the one on the left is for the sensitivity of the exterior of the car, left= less detection, right=increased sensitivity, and the knob on the right is for the interior of the car

Print Page | Close Window