viper 3002 in 2002 ram

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=127798
Printed Date: May 20, 2024 at 5:40 AM

Topic: viper 3002 in 2002 ram

Posted By: varinafootball
Subject: viper 3002 in 2002 ram
Date Posted: July 02, 2011 at 10:14 PM

Ok i am working on figuring this out... Now i am trying to figure the power lock thing out i have found the wiring diagram on here and it says Power Lock WHITE/ green   -   driver kick panel
Notes: Lock requires a negative trigger thru a 820 ohm resistor. Unlock requires a negative trigger thru a 330 ohm resistor. MUST use relays.
Power Unlock same wire as power lock
Lock Motor tan/pnk or tan/blk      driver kick panel
Unlock Motor blue      driver kick panel

Now does anyone have a diagram i could look at this is confusing me a little. Any help would be great
Thanks

Replies:

Posted By: flobee4
Date Posted: July 03, 2011 at 6:22 AM

Top Diagram of web page, you will need to relays.

Link

Posted By: varinafootball
Date Posted: July 05, 2011 at 8:55 AM

Does it matter what wattage resistor i get like 1/2 watt or 5 watt as long as its the right ohm resistance ?

Posted By: kreg357
Date Posted: July 05, 2011 at 12:03 PM

Any wattage 1/4 watt and above is fine.

-------------
Soldering is fun!

Posted By: varinafootball
Date Posted: July 05, 2011 at 6:48 PM

Thanks for the help to both of you !!

Print Page | Close Window