529t on cm 300 compustar
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=127804
Printed Date: October 31, 2025 at 6:32 AM
Topic: 529t on cm 300 compustar
Posted By: lake207
Subject: 529t on cm 300 compustar
Date Posted: July 03, 2011 at 8:55 PM
i am installing 529T on cm300 compustar remote start. i don't know witch wire should i use for activation in put orange wire on 529T. right now i have it wired to cm 300 compustar CN2 black -status output pin 2.the problem is using this wire i have to start the car to close the roof and my windows.
Replies:
Posted By: howie ll
Date Posted: July 05, 2011 at 12:10 PM
CN1 pin 5 VIOLET aka GWA or ground when armed, you were using the black GWR aka status aka ground while running.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: lake207
Date Posted: July 06, 2011 at 12:20 AM
i got it thank you for helping. i head to use diode 1 amp 1N4001.
Posted By: howie ll
Date Posted: July 06, 2011 at 2:56 AM
That's good, just that there's more safety margin on a 4004 (reverse voltage protection).
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|