frustrated and confused, viper alarms

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=127815
Printed Date: June 01, 2024 at 12:29 PM

Topic: frustrated and confused, viper alarms

Posted By: speedaholic
Subject: frustrated and confused, viper alarms
Date Posted: July 04, 2011 at 9:58 PM

I have a couple of issues and I hope I came to the right spot..

I have two viper alarm systems one of them is the 5702v which is in my car and I think the other one is a Viper 5901.
With the remote of the 5702v I programmed it for the truck unfortunately it did not set itself for car 2 so what I have going on
is when I hit the button now both of the vehicles lock and unlock..

I'm trying to figure out how to remove the truck off of it and select car 2 next time to program it...

For some reason on that remote it only shows car 1 and I can't figure out how to select car2 with the 5702v .

With the Viper 5901 remote, when I select car 1 it doesn't do anything except go directly to program...

I'm off frustrated and confused any help please.

Replies:

Posted By: awdeclipse
Date Posted: July 04, 2011 at 10:05 PM

I would imagine you have to delete the remotes from the Alarm, not the other way around.

Check the manual, should be a method to delete all remotes then you can start over.

Posted By: speedaholic
Date Posted: July 04, 2011 at 10:07 PM

Loos like what this guy did..

https://www.the12volt.com/installbay/forum_posts.asp~TID~127815~get~last#633814

Posted By: speedaholic
Date Posted: July 04, 2011 at 10:08 PM

Sorry this link

https://www.the12volt.com/installbay/forum_posts.asp?tid=120123&KW=tedmond

Posted By: speedaholic
Date Posted: July 04, 2011 at 11:36 PM

Ok got it working and I know how to set car 2 on the 5702v and the 5901 viper remote.. posted_image