xk09 bypass module
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=127859
Printed Date: April 28, 2024 at 9:17 PM
Topic: xk09 bypass module
Posted By: daisyrock88
Subject: xk09 bypass module
Date Posted: July 08, 2011 at 7:13 PM
Hi, have a 2001 Jeep and install a Viper 5901 with a Xpresskit XK09 bypass module. The problem is cutting the third wire at the Sentry Key module as on the XK09 module on the black connector. Problem is I have no third wire, it's a blank space on the plug. Does anyone knows exactly what color is the wire at the Sentry Key module to cut to connect the XK09? Any inputs is deeply appreciated!
Replies:
Posted By: kreg357
Date Posted: July 08, 2011 at 8:35 PM
Assuming a 2001 Jeep Grand Cherokee...
Depends on which side you start counting from..
You are looking for the Black, 6 Pin, SKIM connector. Pin 3 should be Blue/White. For reference Pin 5 should be either be Yellow/Purple or Yellow/Black, depending on whether the vehicle has the factory alarm.
Here is a diagram from Fortin for installing their EVO-ALL : https://ifar.ca/en/download/3098/preview.html Install Type 15 on page 21 is for your Jeep and has a diagram of the connector. The wire is labeled "Ignition". ------------- Soldering is fun!
Posted By: daisyrock88
Date Posted: July 09, 2011 at 6:29 AM
Thank you much for the infos. Problem is I don't have that color wire on the black skim connector and blank on pin 3, no wire there at all.
Posted By: kreg357
Date Posted: July 09, 2011 at 7:04 AM
Interesting.  While I have never seen one, there are some Jeeps without the immobilizer.
What color plastic head do you have on your ignition key? Gray or Black? Gray is Senrty Immobilizer, Black is no immobilizer. If it's the Black key, get a plain replacement key made at the local hardware store for $1.99 and try it out. ------------- Soldering is fun!
Posted By: daisyrock88
Date Posted: July 09, 2011 at 4:25 PM
Gray.
Posted By: godd dan it
Date Posted: July 10, 2011 at 3:28 PM
I installed a Clifford alarm/remote starter with XK09 on a Jeep Grand Cherokee. I think it was a 2001, but I cant remember. I had the same problem. I tried remote starting the vehicle without hooking up the wire that is suppose to go to the 3rd wire on the plug. The vehicle started. But after a few mins and a few attempts, the vehicle wouldnt start after that. Im not sure if it is a tach a problem or not hooking up that wire on the XK09. I need to look into it further. Try to remote start it without hooking up the wire. Let me know what happens.
-------------
Posted By: daisyrock88
Date Posted: July 12, 2011 at 6:37 AM
Thanks, It wouldn't start. I can hear the Viper 5901 clicking, that's about it.
|