python 991 in 66 chevelle

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=127961
Printed Date: May 29, 2024 at 2:19 AM

Topic: python 991 in 66 chevelle

Posted By: jazric11
Subject: python 991 in 66 chevelle
Date Posted: July 18, 2011 at 3:52 PM

I upgraded the wiring to a Painless 18 circuit system so it's not factory. I also installed door lock kit (Electric Life LK01-10-122).

I don't intend to use remote start. I want to have starter kill.

Do I need to hook up everything in the H3 section of the Python 991?
The documentation suggests an "onboard starter kill relay" and I can't for the life of me figure out where it is.
Can I ignore the 5 Pin connector for Remote start input?

Replies:

Posted By: itsyuk
Date Posted: July 20, 2011 at 1:08 PM

given your situation i think i would leave out the H3 harness and use a standard starter kill relay controlled by the orange "ground when armed" wire.

-------------
yuk
quiet rural missouri, near KC.
If your system moves you physically and not emotionally, you have wasted your money.

Print Page | Close Window