Print Page | Close Window

02 dodge durango

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=127992
Printed Date: May 12, 2025 at 11:25 AM


Topic: 02 dodge durango

Posted By: ramon2001
Subject: 02 dodge durango
Date Posted: July 20, 2011 at 9:15 PM

please help. i recently installed an auto guard basic alarm to 02 dodge durango. the alarm goes off 30 seconds after i activate it. i used diodes on door tiggers and 820 ohm resisterr and 330 ohm to lock and unlock. the alarm says that its a door trigger.i disconnect door trigger wires and alarm doesnt go off. i connect it and it goes off thirty seconds after activation. i even put it on 60 seconds door trigger supervision. please help. i dont get it. thank you in advance.

-------------
RAMON



Replies:

Posted By: kreg357
Date Posted: July 20, 2011 at 9:23 PM

DEI Tip 1076?             https://www.the12volt.com/installbay/file.asp?ID=514



-------------
Soldering is fun!



Posted By: ac0j
Date Posted: July 20, 2011 at 10:54 PM
Is it the factory alarm going off? or the after market?



Posted By: ramon2001
Date Posted: July 23, 2011 at 12:22 AM
the aftermarket alarm goes off.

-------------
RAMON



Posted By: ramon2001
Date Posted: July 23, 2011 at 12:28 AM
there is a link from dei. do i use two diodes for each door trigger? i kind of dont get it? thanks

-------------
RAMON



Posted By: jmsounds
Date Posted: July 26, 2011 at 3:52 PM
yes u do but you have to follow the instruction carefully solder them if you can if not make sure you make good connections


Print Page | Close Window