2006 toyota sequoia

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=128046
Printed Date: May 14, 2025 at 5:04 PM

Topic: 2006 toyota sequoia

Posted By: ccourt4175
Subject: 2006 toyota sequoia
Date Posted: July 26, 2011 at 12:34 PM

Just recently purchased a python 1401 and I am having problems with the relays that must be installed for the door locks. any help would be greatly appreciated. Wiring diagrams would solve my problem.

Replies:

Posted By: kreg357
Date Posted: July 26, 2011 at 7:16 PM

Here is a link to the Bulldog solution :
https://www.bulldogsecurity.com/diagrams/extrainfo/diagrams/14301_SEQUOIA_TOYOTA%20and%20LEXUS%20door%20lock%20interface.pdf

Here is a link to the Audiovox solution :
https://www.the12volt.com/installbay/file.asp?ID=661

Another way is with a "Door Lock Module". Here is a link to the offerings from DEI : https://www.xpresskit.com/VehicleCompatibility.aspx?p=null&year=2006&make=Toyota&model=Sequoia&ps=3&s=0 Slightly more expensive but faster...

-------------
Soldering is fun!

Posted By: Mike M2
Date Posted: July 30, 2011 at 7:06 AM

Get power for the relay from the blue/white on the door switch module. That leaves just two wires to run thru the jamb boot...

-------------
Mike M2
Tech Manager
CS Dealer Services