Print Page | Close Window

viper 160xv in 95 ford contour

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=128085
Printed Date: May 17, 2025 at 11:22 PM


Topic: viper 160xv in 95 ford contour

Posted By: dennisj330
Subject: viper 160xv in 95 ford contour
Date Posted: July 29, 2011 at 11:07 AM

I need help on how to install the Viper 160VX in my 95 Ford Contour, any help would be gratefull!



Replies:

Posted By: kreg357
Date Posted: July 29, 2011 at 12:10 PM

Here is a link to the 160XV install guide : https://www.the12volt.com/installbay/file.asp?ID=498

Here is a link to the 12Volt wiring guide : https://www.the12volt.com/installbay/alarmdetail/813.html

Here is a link to Bulldog Security for their wiring guide : https://www.bulldogsecurity.com/bdnew/vehiclewiringdiagrams.asp

Here is a link to AudioVox for their wiring guide : https://techservices.audiovox.com/Login.aspx    Sign up is free.

Here is a link to the DEI site for their wiring guide :  https://www.readyremote.com/main.asp

It appears that they didn't start installing a transponder immobilizer until 1998, so you should be fine without a bypass module.

Compare the wiring guides and make up a crib sheet.  Use that as guide to locate and verify ( with a DMM ) all the wires needed for the 160XV system.  Solder all connections and use a quality electric tape to insulate.



-------------
Soldering is fun!


Print Page | Close Window