Print Page | Close Window

key turn push button

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=128100
Printed Date: May 21, 2024 at 2:12 PM


Topic: key turn push button

Posted By: j-dub-1989
Subject: key turn push button
Date Posted: July 31, 2011 at 10:12 PM

ok guys thanks in advance i have a 1999 tahoe and i wanna put a start button in where i turn the key on and push the button to start the truck anyone know how i would go about doing this or any other cooler way that i can put a push start button in i was told i have to run a wire from the starter or the starter solenoid



Replies:

Posted By: mustyk@att.net
Date Posted: August 03, 2011 at 10:10 PM
Install a Omega RS 230 remote start and connect the trigger wire to a pushbutton switch

-------------
thetopinstaller



Posted By: KPierson
Date Posted: August 04, 2011 at 1:43 PM
Connect the push button to a relay.

Connect pin 30 of the relay to high current ignition controlled voltage feed, connect Pin 87 to the starter wire.

When the ignition is in the "ON" position and you push the button the start will crank.

-------------
Kevin Pierson


Print Page | Close Window