which relay for type b door locks
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=128117
Printed Date: May 14, 2024 at 8:33 AM
Topic: which relay for type b door locks
Posted By: eddiejb11
Subject: which relay for type b door locks
Date Posted: August 02, 2011 at 12:45 PM
I was installing an alarm on a f250 2006 type b and I encountered a problem with the door locks, I connected all the wires, alarm activates/disactivates but it won't lock, unlock, after some reading and researching I found out I needed relays on my locks because of polarity, anyone knows which relay I need and how to instal, where to pick some up??? Thx
-------------
Want things done, get it done yourself
Replies:
Posted By: kreg357
Date Posted: August 02, 2011 at 4:11 PM
Did the truck come with Factory Keyless Entry?
-------------
Soldering is fun!
Posted By: eddiejb11
Date Posted: August 02, 2011 at 6:23 PM
No, type b non keyless entry, I was looking at the wiring and it had an alarm before, in the driver kick panel it has it original wires cut by 2 inches so it had a gap in the door lock switch wires and they connected it together as it had something missing, which I assume it had a relay, I saw this and I figure it's what I need, https://www......com/item_8487_Directed-451M.html
-------------
Want things done, get it done yourself
Posted By: eddiejb11
Date Posted: August 02, 2011 at 8:36 PM
Sry, type c
-------------
Want things done, get it done yourself
Posted By: kreg357
Date Posted: August 02, 2011 at 9:30 PM
Sounds like you have Type C ( rev) locks.
Here is info from Bulldog Security for the 2006 Super Duty with Factory power locks:
NOTE #3: Vehicles WITHOUT a FACTORY KEYLESS Entry Remote Control are a TYPE "C" Door
Locking System. Vehicles WITH a FACTORY KEYLESS Entry Remote Control are a
TYPE "B" Door Locking System and the LOCK wire is a WHITE/ RED (TYPE B) and the
UNLOCK is a BLACK/ WHITE TYPE B), BOTH are located in the Drivers Kick Panel, at the
Door Harness.
If your truck has factory power locks without remote keyless entry FOB's, you have
Type C locks ( rev ) and the DEI 451M module will handle it. Here is a link to the
DEI 451M install guide : https://www.the12volt.com/installbay/file.asp?ID=726
Don't know which Brand / Model alarm system you are installing, but some do have built
in relays, in which case the 451M isn't needed. ------------- Soldering is fun!
Posted By: howie ll
Date Posted: August 03, 2011 at 1:02 AM
Does your alarm have two lock wires or six?
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: eddiejb11
Date Posted: August 03, 2011 at 4:08 AM
2
-------------
Want things done, get it done yourself
Posted By: howie ll
Date Posted: August 03, 2011 at 4:39 AM
Then take Kreg's advice and use a 451 module, it comes with instructions.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|