Print Page | Close Window

viper 5101 or python 1401

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=128126
Printed Date: April 15, 2024 at 11:35 PM


Topic: viper 5101 or python 1401

Posted By: gdsjassal
Subject: viper 5101 or python 1401
Date Posted: August 03, 2011 at 11:19 AM

Hi,

I am trying to install Python 1401 remote starter/keyless entry system in my 2004 Honda Civic SE. I am not a Pro but i know i can do it.

I have easily installed door lock/unlock but having issues with starter.
I read in one of the forum posts that viper 5101 is similar to python 1401. i tried to follow install instruction from that as well but no success.

Problem is that my Civic has
Starter (+)
Ignition 1 (+) (Only 1 ignition wire)

Python Starter kit has (Two ignition 1 wires)
Starter Output (+)
Ignition 1 Input/Output (+)
12VDV Constant input for ignition 1 Relay

Which one of these two ignition wires I should attach to civic?

And is there any other wire that i need to connect for ignition?
How does engine start without key inside ?

Please and thank you.







Replies:

Posted By: kgerry
Date Posted: August 03, 2011 at 1:04 PM

what bypass module are you using?

connect Ign 1 (pink) to your Ign wire... Flex output not used... dont hook up the RED / white flex primary....



-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979




Posted By: gdsjassal
Date Posted: August 03, 2011 at 3:23 PM


I am not using bypass module yet.
Is that to override the anti-theft system (If I am right)?

I will do more research on it.

I appreciate you answer thanks.





Posted By: haotran
Date Posted: August 30, 2012 at 1:01 PM
i have python 1401 and hyundai elantra 2008 ! can you guys help me install it ? thank you so much !

-------------
Hao




Posted By: tommy...
Date Posted: August 30, 2012 at 4:02 PM
haotran wrote:

i have python 1401 and hyundai elantra 2008 ! can you guys help me install it ? thank you so much !


Start your own thread... Will be alot easier than answering two people in one thread...

-------------
M.E.C.P & First-Class
Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!




Posted By: howie ll
Date Posted: August 31, 2012 at 2:19 AM
And no, you can try to install it on your own thread and we might help.
To the first poster you will get no further without a by-pass.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.




Posted By: haotran
Date Posted: September 20, 2012 at 8:13 PM
I don't have manual installation,can u show me which wire need and which no? What elese stuff I need for star? Thank you!

-------------
Hao




Posted By: howie ll
Date Posted: September 21, 2012 at 1:43 AM
2007 is in the Vehicle Wiring section, 1401 should be in Downloads/Manuals or go to Viper's site, support section.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.





Print Page | Close Window