2011 mazda 3 avital 3100

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=128140
Printed Date: May 02, 2024 at 8:19 AM

Topic: 2011 mazda 3 avital 3100

Posted By: bwhite21
Subject: 2011 mazda 3 avital 3100
Date Posted: August 04, 2011 at 7:36 PM

Rookie installer here, just hoping I can find some help before the install tomorrow. I'll have the lead guy overseeing the install but I'd like a head start on him. Its an Avital 3100 keyless entry alarm. I have all my wiring diagrams and photos. Anything I should be aware of or any tips for a new installer would be great. ( I.E. Which wires will I need from the module, bypasses, diodes, etc.) Thank you in advance.

Replies:

Posted By: bwhite21
Date Posted: August 04, 2011 at 11:03 PM

Also, if anyone could give me a heads up on what HWires I wont use that would be a bonus

Posted By: pitoaudiovisual
Date Posted: August 05, 2011 at 3:48 PM

ok H1 is for the killer switch so as u wire up the killer switch the orange goes to the killer switch.

H2 is for the parking lights

H3 not used

H4 is for the dome

H5 is the negative door trigger '

H6,H7, not used

H8 is for ground

H9 not used

H10 is for the siren

H11 is constant

H12 is for power truck release

-------------
Confidence is the key to any project!!

Print Page | Close Window