5901 ground when armed

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=128194
Printed Date: May 12, 2025 at 5:44 PM

Topic: 5901 ground when armed

Posted By: paradox_108
Subject: 5901 ground when armed
Date Posted: August 10, 2011 at 9:42 AM

Just wanted to know if this wire is active while remote start?

Replies:

Posted By: tonanzith
Date Posted: August 10, 2011 at 10:11 AM

No. This wire is typically used to power a starter kill switch or other relay only to be powered while armed. During remote start this wire should have no current at all..

-------------
Gary Sather

Posted By: KPierson
Date Posted: August 10, 2011 at 2:18 PM

Yes. This wire is typically used to prevent grinding the starter when the vehicle is remote started. During remote start this wire should have a (-) output on it.

-------------
Kevin Pierson

Posted By: paradox_108
Date Posted: August 11, 2011 at 2:32 AM

i was going to use this wire to kill the fuel pump.... is there anyway to add another kill point?

Posted By: KPierson
Date Posted: August 11, 2011 at 6:17 AM

You can turn the anti grind feature off.

I would recommend just doing the starter kill.

-------------
Kevin Pierson

Print Page | Close Window