viper 5501 red 4 pin plug

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=128213
Printed Date: May 13, 2025 at 3:54 AM

Topic: viper 5501 red 4 pin plug

Posted By: nascar_crazy
Subject: viper 5501 red 4 pin plug
Date Posted: August 11, 2011 at 12:22 PM

I have a Viper 5501 alarm. What is the 4 Pin red bodied connector for? It is on the same side as the D2D jumpers. I have looked through install instructions and can't find any reference for it.

Replies:

Posted By: roadshop570
Date Posted: August 14, 2011 at 6:29 PM

That should be the D2D input, that harness comes with the newer xpresskit modules when required for doorlock interface or an immobilizer, its makes installation a lot easier and less wiring.

-------------
Chadillac

Print Page | Close Window