trying to a clifford concept 650

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=128230
Printed Date: May 18, 2024 at 10:15 AM

Topic: trying to a clifford concept 650

Posted By: deanobmw
Subject: trying to a clifford concept 650
Date Posted: August 13, 2011 at 2:23 PM

Hi there, i am new to this site. I have been trying to find information online on how to install a Clifford Concept 650 mk II to my BMW e36.

Can anyone on here help me out with this? I have downloaded the manual but im not sure if it is possible to find a manual for my car which will make it a whole lot easier to know where to find what wires.

Any help or advice would be lovely

Deano

Replies:

Posted By: howie ll
Date Posted: August 14, 2011 at 2:48 AM

It's a protected product, approved dealers or installers only. Fiddly but very easy car to install.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Posted By: howie ll
Date Posted: August 14, 2011 at 2:54 AM

If you look carefully, I've done at least 4 posts on this car, listing everything including lock with ignition, window/roof closing pre and post 94, deadlock with alarm on R/S etc. etc.
What year?

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Print Page | Close Window