2008 dodge 2500 parking light trigger

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=128327
Printed Date: May 19, 2024 at 6:28 AM

Topic: 2008 dodge 2500 parking light trigger

Posted By: crwlaway
Subject: 2008 dodge 2500 parking light trigger
Date Posted: August 23, 2011 at 5:24 AM

Installing a compustar remote start with EVO-CHR bypass module. I am new to this multiplex system and dont get the whole ground through resistor to relay. So does that mean i branch(splice) off from the WHITE/ green(parking light negative) wire then put a resistor in series to 85 of the relay and complete the rest of the relay as normal, 12 volts to 86 and 30, then 87 output to alarm module? Thanks in advance.

Replies:

Posted By: ropuma
Date Posted: August 23, 2011 at 4:22 PM

If parking lights from car is negative( cut this wire)
85 WHITE/ green 86 12v.- 30 ground with resistor
87a to switch side of wire cut-from pl. 87 to parking lights(pl)

Posted By: ropuma
Date Posted: August 23, 2011 at 4:25 PM

85 I mean parking lights negative output from alarm

Posted By: crwlaway
Date Posted: August 23, 2011 at 4:43 PM

Appreciate the info.

Print Page | Close Window