2003 chevy suburban and viper 5902
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=128344
Printed Date: May 14, 2025 at 7:30 AM
Topic: 2003 chevy suburban and viper 5902
Posted By: jdlyles
Subject: 2003 chevy suburban and viper 5902
Date Posted: August 24, 2011 at 4:54 PM
please help me doese anyone have info on how to install this unit
-------------
jdlyles
Replies:
Posted By: ropuma
Date Posted: August 24, 2011 at 5:20 PM
Go to alertautomotive for wire schematics and buy this module
INTSL+ from Fortin electronics.
Posted By: jdlyles
Date Posted: August 24, 2011 at 6:56 PM
Its a viper 5902not alert but thank you.
-------------
jdlyles
Posted By: smokeman1
Date Posted: August 24, 2011 at 7:31 PM
Try this web site https://www.bulldogsecurity.com/bdnew/vehiclewiringdiagrams.asp
Do a search on this web site for any other surburban info ------------- When all else fails, Read the Instructions
Support the12volt.com Make a Donation
Posted By: howie ll
Date Posted: August 25, 2011 at 3:12 AM
All the info you need is on this site, your vehicle info already exists, twice over and I've just posted the 5902 install manual.
Also of course refer to the sources as posted above and read my posts in the hot topics section on rookies.
I'm a little bit worried, possibly from the way you posted that you require more than just info.
Neither the vehicle nor this unit were meant to be installed by amateurs so you've been warned!
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|