which bypass module for hummer h3?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=128354
Printed Date: May 14, 2025 at 2:19 AM

Topic: which bypass module for hummer h3?

Posted By: equate
Subject: which bypass module for hummer h3?
Date Posted: August 25, 2011 at 3:00 PM

There is Hummer H3 2006. Anyone knows which bypass module is for it?
I check with Xpresskit. It says XK06. But I check with bulldog, it says DB-ALL.
Anyone installed it before? Thanks for sharing..

Replies:

Posted By: dasbogie
Date Posted: August 25, 2011 at 4:49 PM

We have had some problems using data bypasses in the h3,colorado, canyon platform. We usually use the old 2 relay and resistor method.

-------------
Advanced

Posted By: kreg357
Date Posted: August 25, 2011 at 6:14 PM

The relay and resistor method works well and is the only way to go on the 2008 and up vehicles. On the earlier
vehicles, like your 2006, I have had excellent results with the iDatalink ADS DL flashed with ADS DL GM4 firmware.
The ADS bypass module will also take care of the door locks and factory alarm. If you don't have the USB cable to
flash the module, look at the ADS ALSL GM module. It comes pre-loaded.

As dasbogie also pointed out, the H3 is the same as the Colorado/Canyon. A search on those vehicles will reward you with more info and pictures.

-------------
Soldering is fun!

Posted By: muaiad97
Date Posted: August 29, 2011 at 3:51 PM

u can use IB-PLJX very easy instalation and works good ihav don to many cobalt and h3 with no starter wire