Print Page | Close Window

factory remote to operate Hornet 700T

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=12836
Printed Date: May 28, 2024 at 5:55 PM


Topic: factory remote to operate Hornet 700T

Posted By: congoman
Subject: factory remote to operate Hornet 700T
Date Posted: April 28, 2003 at 1:07 AM

could someone help me with this Hornet 700T from DEI?

I;m working on a 2003 Corrolla, and need to tie in the factory remote to operate the Hornet 700T alarm. The problem is I can't seem to find the correct wires that makes the system respond to the transmitter. I know that I need the door lock and unlock wires that change polarity when the remte is pressed, but where do I search for it?  I've got all the other wires----parking light, door trigger, ignition, 12v...

also this car has driver door unlock priority.......   can anyone suggest anything ??




Replies:

Posted By: Chris Luongo
Date Posted: April 28, 2003 at 6:32 AM
In the driver's kick panel, there are two plugs, which contain wires that go into the driver's door. Find the thick red and blue wires. The blue is the lock motor wire, and the red is the driver's unlock motor.

Along the doorsill, open the harness that runs to the rear of the car. The passengers' unlock motor wire is also red, and it is the same size as the wires for the driver's door.





Print Page | Close Window