avital alarm/remote start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=128409
Printed Date: September 13, 2025 at 9:32 PM
Topic: avital alarm/remote start
Posted By: willy4820
Subject: avital alarm/remote start
Date Posted: August 31, 2011 at 2:19 PM
1996 Blazer 4dr. LT. Avital 4303-1030, 5CC1263F6FA are numbers on both black boxes. I want to remove this system. Cannot find any info for returning wiring to OEM. There are 3 relays that have been installed or altered. They have connectors on them not GM plugs. The LED is on solid red now. There is a toggle switch under the drivers panel. (valet switch I guess). Cannot find any info on the 4303-1030 number on the two black boxes. Any help to convert to OEM would be appreciated.
Thanks in advance.
Replies:
Posted By: howie ll
Date Posted: August 31, 2011 at 4:12 PM
Basically trace all the wires from the alarm, cut them and insulate where they were joined to the factory wiring.
There might be a starter cut, obviously rejoin the leads at that point.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|