Print Page | Close Window

remote start on murano 2010

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=128493
Printed Date: May 02, 2024 at 12:44 AM


Topic: remote start on murano 2010

Posted By: antonio7114
Subject: remote start on murano 2010
Date Posted: September 11, 2011 at 12:47 AM

I need to install a 5901 viper remote start on a 2010 nissan murano that has push to start button. how do I add  the bypass module.

-------------
antonio



Replies:

Posted By: kreg357
Date Posted: September 11, 2011 at 6:59 AM

You didn't mention which bypass module you were planning to use.  However most bypass modules come with a very
well written installation guide that details most if not all the wiring required.  My "go to" module for Nissans is
iDatalink.  Here is a link to the Web site for more info :  https://www.idatalink.com/support/helpdesk  Look up
your vehicle and download the install guide for their ADS DLSL CA2 module. 

Other choices are from Frotin :  https://ifar.ca/en/vehicles/nissan/murano/2010/

And DEI ( DLPK  for PTS) : https://www.xpresskit.com/VehicleCompatibility.aspx?p=null&year=2010&make=Nissan&model=Murano&ps=1&s=0



-------------
Soldering is fun!


Print Page | Close Window