wiring diagram for 2005 g35 coupe 6mt

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=128529
Printed Date: July 20, 2025 at 11:24 AM

Topic: wiring diagram for 2005 g35 coupe 6mt

Posted By: g35wires
Subject: wiring diagram for 2005 g35 coupe 6mt
Date Posted: September 15, 2011 at 12:11 AM

Hi,

I will be attempting to install a Viper 5902 alarm into my 2005 G35 Coupe 6MT. I'm planning on using the remote start feature so I need a bypass as well.

First off, can someone kindly post the wiring diagram for this car?

Also, I'm thinking about using the Xpresskit DB-ALL full-featured module in D2D mode. Any reasons not to use this model?

Thanks.

Replies:

Posted By: i am an idiot
Date Posted: September 15, 2011 at 6:00 AM

https://www.the12volt.com/installbay/vehicles.html

Posted By: g35wires
Date Posted: September 17, 2011 at 3:25 PM

Thanks, I've been to that page - just wasn't sure if the coupe had the same wiring scheme compared to the sedan. Guess I can actually open the kickpanel to check...

Have another question - I noticed that the installation manual for the DB-ALL has optional connections for things like "(-) Neutral Safety Input/(-) Handbrake Status Input" if D2D is being used. I plan on using D2D, but does the Viper 5902 understand all of these messages? I couldn't get any information on this in the 5902 installation manual.

Would like to know before I start unnecessarily splicing wires...especially around the ECU area.

Any help/tips would be appreciated.

Posted By: i am an idiot
Date Posted: September 19, 2011 at 11:00 PM

I am pretty sure the wire colors will be the same. I have no idea about the DB-ALL and the things you are asking. Maybe some of our hands on guys will be able to answer that for you.