Print Page | Close Window

carvox cx 601 am

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=128540
Printed Date: May 12, 2025 at 1:47 PM


Topic: carvox cx 601 am

Posted By: saweetlou
Subject: carvox cx 601 am
Date Posted: September 16, 2011 at 4:46 PM

Just purchased this alarm and I cannot figure out how to get a negative pulse out to trigger my door locks. This is going into a 2002 Toyota Tacoma with factory power locks. The manual this alarm comes with SUCKS or maybe its just me but I put a meter on every single wire coming out of this alarm and couldnt find anything.
Please Help



Replies:

Posted By: saweetlou
Date Posted: September 16, 2011 at 6:42 PM
I have been searching and cannot find any info to give me a negative pulse for the lock and unlock. I think that 2 wires from the brain have to be connected together to get me that pulse but the manuel doesnt give that info.


Print Page | Close Window