specific alarms compatible to idatalink?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=128541
Printed Date: May 12, 2025 at 10:46 AM

Topic: specific alarms compatible to idatalink?

Posted By: cezarm
Subject: specific alarms compatible to idatalink?
Date Posted: September 16, 2011 at 5:02 PM

I am wanting to know what specific alarms w/remote starts that reduce complex wiring when using idata products? If this exists?

Replies:

Posted By: kreg357
Date Posted: September 16, 2011 at 5:45 PM

I have not found the answer or a list on their WEB site, either. The best person to answer this is fellow forum member "racing_bidule".

A call to the remote start manufacturer is an other good place to start.

Ultra Start ( most newer models ) and Compustar ( CS600, CM5x00 & CM6x00 ) do have Programming Options to select either Fortin or iDatalink on their RS232 port. I believe some/most AutoPage units are D2D capable, also.

-------------
Soldering is fun!

Posted By: tonanzith
Date Posted: September 17, 2011 at 10:28 AM

Idatalink is designed for data or d2d interface with Autopage alarms and remote starters although they can be wired w2w with ANY aftermarket alarm/remote start it just requires more wiring :)

-------------
Gary Sather

Print Page | Close Window