2006 dodge ram alarm/remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=128551
Printed Date: May 11, 2025 at 1:17 PM

Topic: 2006 dodge ram alarm/remote start

Posted By: chek
Subject: 2006 dodge ram alarm/remote start
Date Posted: September 17, 2011 at 10:03 PM

I plan on using an Excalibur omega 2 way alarm/remote start and Xpress kit DBALL interface. Will the DBALL work for the ALARM part of the remote start also or will I still have to direct wire all the door pins, accessory wires and so forth?

Replies:

Posted By: Twelvoltz
Date Posted: September 18, 2011 at 9:16 PM

According to DEI's manual for the DB-ALL and the 2006 Ram it will give door status to the alarm. The accessory wire in that truck is multiplex and the DB-ALL handles that as well. Make sure you read and fully understand the installation manual for the DB-ALL, that piece makes the installation pretty simple. I have trust issues with D2D wiring, so I always use W2W...you can trouble shoot W2W easier than D2D if you have to. Also, make sure you change out to 10amp fuses for the ignition wiring.

-------------
Installer, IT support, and FFL. I need less hobbies.

Posted By: chek
Date Posted: September 19, 2011 at 6:22 PM

Thanks Twelvoltz . I do a lot of remote start keyless entry systems, but not many people want alarms around here so I'm not as up to speed on them.