Print Page | Close Window

03 pilot remote start wiring diagram

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=128575
Printed Date: May 03, 2024 at 4:13 PM


Topic: 03 pilot remote start wiring diagram

Posted By: wyciwug
Subject: 03 pilot remote start wiring diagram
Date Posted: September 19, 2011 at 4:28 PM

I am going to do the wiring diagram for my above vehicle.

Can someone please provide wiring diagram for NECESSARY wires only basically to make the remote start work and include door lock/unlock.  This is to be used with Python 413 or Avital 4103.  Thanks all.



-------------
DCD



Replies:

Posted By: cmk0808ny
Date Posted: September 19, 2011 at 6:06 PM
battery
ignitons
accessories
starter
brake
door unlock
door lock
factory disarm
factory arm
tach
ground
horn(if wanted) for panic
status- for bypass



Posted By: wyciwug
Date Posted: September 21, 2011 at 4:55 PM

Hello

I heard that during remote start, the factory remote control will not be able to unlock/lock doors.  Am I correct?  Any advice will be really appreciated it.  I want to do it in a way that I can also use factory remote to unlock doors.  Thanks



-------------
DCD



Posted By: cmk0808ny
Date Posted: September 21, 2011 at 5:15 PM
you have to hook up door lock from the 4103- they will work. the factory remote will not..


you can also get a 4113 one button instead and hook up unlock for remote start



Posted By: Mark Mizenko
Date Posted: September 25, 2011 at 6:43 PM
Get the locks in the pass fusebox, arm/disarm there too if available.  You'll need them, like was said... fact remotes dont operate with the ignition on/engine running


Print Page | Close Window