python 872 no remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=128606
Printed Date: May 03, 2025 at 8:54 PM

Topic: python 872 no remote start

Posted By: hakim
Subject: python 872 no remote start
Date Posted: September 23, 2011 at 8:11 PM

Hi , I have a 2003 Acura Tl type S... yesterday, i installed a python 872 on it. It locks and unlock the doors, the alarm is working too.
My problem is when I want to start the car by the remote, nothing happens or my light flash 7 times.
Can somebody help me with this pls??

-------------
Hakimm

Replies:

Posted By: scrtcell
Date Posted: September 23, 2011 at 8:19 PM

you are going to need a bitwriter to change the program from manual transmission to automatic

Posted By: hakim
Date Posted: September 23, 2011 at 9:20 PM

thanks bro, but how come the module is pre-programmed for manuel transmission??

-------------
Hakimm

Posted By: clarence1996
Date Posted: September 23, 2011 at 9:43 PM

You can do it without the bitwriter

-------------
TheWire1

Posted By: hakim
Date Posted: September 23, 2011 at 9:54 PM

how can I do it because I dont have bitwriter?

-------------
Hakimm

Posted By: smokeman1
Date Posted: September 23, 2011 at 10:16 PM

Go to the downloads section of this site and download the install manual for Viper 5701, (same as the Python872), starting on page 60, it explains how to get into the menus for changing items. You are going to want Menu 3, Item 1, Option 2.

-------------
When all else fails, Read the Instructions
Support the12volt.com Make a Donation

Posted By: hakim
Date Posted: September 23, 2011 at 10:17 PM

thanks you

-------------
Hakimm

Print Page | Close Window