audiovox pro 9776a

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=128694
Printed Date: May 05, 2024 at 10:07 AM

Topic: audiovox pro 9776a

Posted By: explorertim
Subject: audiovox pro 9776a
Date Posted: October 01, 2011 at 3:20 PM

I have an Audiovox 9776A installed on my 09 Explorer. It has never been setup for Passive Arming/Locks and I am trying to set it up but haven't had any luck. Here are the steps I followed:

Turn Ignition On

Press Valet 3x

Turn Ignition Off and then On

Press & Release Valet

Press Lock button on Remote

Any help is appreciated. Thanks!

Replies:

Posted By: Chris Luongo
Date Posted: October 01, 2011 at 3:33 PM

Do you have the installation guide?

Programming most of the features is horrible enough to begin with, and nearly impossible without the guide.

If you don't have the guide, go to techservices.audiovox.com (no www in front of that) and sign up for a free account. Install guides are in there. Type in your unit without any hyphens or spaces "pro9776a" like that.

Print Page | Close Window