viper 5901 small connectors
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=128703
Printed Date: May 15, 2025 at 9:24 AM
Topic: viper 5901 small connectors
Posted By: rcavictor
Subject: viper 5901 small connectors
Date Posted: October 02, 2011 at 12:50 AM
Hello friends ,
What is the technical name for little connectors used on Viper 5901 , and all Directed products ? ------------- Thanks for answering, rcavictor.
Replies:
Posted By: howie ll
Date Posted: October 02, 2011 at 2:46 AM
Molex is the manufacturer.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: rcavictor
Date Posted: October 02, 2011 at 10:00 PM
Hello friends ,
I am asking technical type name . Valet switch , door lock , optional sensor and bitwriter ports are all same type .
I saw Heade connector somewhere , it looked alike ... Is it same thing ? ------------- Thanks for answering, rcavictor.
Posted By: itsyuk
Date Posted: October 02, 2011 at 10:11 PM
post what you are looking for and if someone has them it might save ya hunting ad possibly spending.
-------------
yuk
quiet rural missouri, near KC.
If your system moves you physically and not emotionally, you have wasted your money.
Posted By: howie ll
Date Posted: October 03, 2011 at 1:46 AM
Or peruse Mouser, Farnell or RS here in the UK there are literally 100s of different types all slightly different by Molex alone, then add in Amp-Tycho, Kramm in Denmark, do you see where this is going.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: howie ll
Date Posted: October 03, 2011 at 1:48 AM
I've just realised. These aren't the regular Molex connectors as used on the main white plugs but a smaller one, probably Taiwan, ask DEI directly.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: KPierson
Date Posted: October 03, 2011 at 7:49 AM
Look in to a company called JST if you are looking for these type of connectors.
I think the technical name is "wire harness connector". "Header" would be a good name for the on board connectors and "plug" would cover the harness side.
-------------
Kevin Pierson
|