door pin, 99 jeep cherokee

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=128705
Printed Date: May 20, 2024 at 5:53 PM

Topic: door pin, 99 jeep cherokee

Posted By: glass22
Subject: door pin, 99 jeep cherokee
Date Posted: October 02, 2011 at 8:39 AM

I installed a Crimestopper SP-401 in a 99 Jeep Cherokee yesterday. Everything works great. I had to install door lock motors in each door since it was a non power truck. The alarm triggers on the door pin, but only the front doors have pins. Can I hook it up to the door locks to make it trigger so each door is covered? If so, how do I go about this?

Im trying to learn these alarms.

Thanks

Zak

Replies:

Posted By: howie ll
Date Posted: October 02, 2011 at 3:36 PM

After carefully finding the best position or better still looking at a vehicle with the pins fitted, just copy and wire to your alarm door pin connector.

-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.

Print Page | Close Window