Print Page | Close Window

2002 jeep with dlpkchg1?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=128745
Printed Date: May 14, 2025 at 9:07 PM


Topic: 2002 jeep with dlpkchg1?

Posted By: jasn1981
Subject: 2002 jeep with dlpkchg1?
Date Posted: October 06, 2011 at 1:40 PM

Ok. I have a question. How would I get the door locks to work/factory arm/disarm.

It should be d2d with my viper 5902, buw won't do ANYTHING. I have the alarm/remote start all complete, but when I go to test it the locks and unlocks won't activate nor will the lights which may or may not be controlled via the data bus.

I can't find instructions for my rig anywhere, but keep being told it will work on my jeep. Do i need to connect something other than just the Data to the OBD and the D2D cable?

Thank you!




Replies:

Posted By: jasn1981
Date Posted: October 06, 2011 at 1:43 PM
Side note can I hook up the rear defrost wire at the switch and have it work?


Print Page | Close Window