1995 skyline window roll up
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=128832
Printed Date: May 19, 2024 at 12:27 AM
Topic: 1995 skyline window roll up
Posted By: d6-karl
Subject: 1995 skyline window roll up
Date Posted: October 13, 2011 at 2:54 PM
hey guys, does any one know how the window switches work on the 1995 skyline, i have to install and intelli start 4 on my friends, was looking at the wires eriler but my brain was refusing to work, any info would be great :)
-------------
D6-In Car Solutions
Replies:
Posted By: howie ll
Date Posted: October 13, 2011 at 3:06 PM
Bog standard, go to the motor wires in each door, the switches use data so ignore them. You knew I was going to help you there. You will also need a driver's door actuator if I remember correctly. Tach is BLACK/ white at either coil or engine management or rear of instrument cluster.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
Posted By: d6-karl
Date Posted: October 13, 2011 at 3:14 PM
ahh, did wonder if that was the case, we moved the switch into the center console so i was hoping i chould do everything there, and yes i did know you were going to be my hero howie :)
-------------
D6-In Car Solutions
Posted By: howie ll
Date Posted: October 13, 2011 at 3:31 PM
If both switches are in the console and they are standard wiring, e.g. pos, neg and a pair of motor wires which are ground at rest, then you're OK with that.
-------------
Amateurs assume, don't test and have problems; pros test first. I am not a free install service.
Read the installation manual, do a search here or online for your vehicle wiring before posting.
|