1998 camaro z28

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=128881
Printed Date: May 15, 2025 at 3:31 PM

Topic: 1998 camaro z28

Posted By: chicomax75235
Subject: 1998 camaro z28
Date Posted: October 16, 2011 at 2:50 PM

IVE INSTALLED A VIPER 5901 I CAN GET THE CAR TO START WITH THE KEY IN THE IGNITION BUT WITH OUT IT IT WHONT CRANK I GOT A BYPASS MODULE ITS A PKG7 IT SHOWS U TWO CONNECTERS BUT I CAN ONLY FIND ONE THE ONE THAT COMES FROM THE KEY CYLINDER TWO WIRES IS THIS WHERE I CONNECT IT TWO

-------------
Jose Chapa

Replies:

Posted By: kreg357
Date Posted: October 16, 2011 at 6:11 PM

Are you sure the PKG7 is the correct bypass module for that car? I believe it has GM VATS and needs a PLJX or similar type bypass.

-------------
Soldering is fun!

Posted By: chicomax75235
Date Posted: October 16, 2011 at 9:02 PM

WHEN I BOUGHT THE ALARM THATS THE MODULE THEY GAVE ME NO WONDER IT WHONT WORK THANKS IMA TRY ANOTHER MODULE

-------------
Jose Chapa

Posted By: kreg357
Date Posted: October 16, 2011 at 9:19 PM

Here is a link to DEI's current modules for your car : https://www.xpresskit.com/VehicleCompatibility.aspx?p=null&year=1998&make=chevrolet&model=camaro&ps=1&s=0

-------------
Soldering is fun!

Print Page | Close Window